Look-up in Google Scholar
Title: Control de calidad de los tipos de ladrillos King Kong 18 huecos sobre sus propiedades mecánicas, físicas y químicas, Trujillo 2018
Advisor(s): Azañedo Medina, Wiston Henry
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 8-Jul-2021
Institution: Universidad Privada del Norte
Abstract: The city of Trujillo is located in an area of high seismicity (zone 4), the majority of which are informal constructions using bricks of very low resistance and durability, for this reason it is necessary to evaluate the quality control of the bricks in formal companies and by For this reason, King Kong type 18 industrial hollow ceramic bricks were chosen because the RNE E.070 standard mentions that the ceramic brick must comply with its resistance and weight according to its category; As well, it must be manipulated with one hand and also because it is the most used in the construction industry and to withstand humidity, another quality is that it allows us to eliminate external noise from one environment to another up to 70% and resists high temperatures and also establishes parameters for zone 4 according to the seismic zoning map, which should be used industrial solid bricks for bearing walls greater than four floors considering a type of solid or solid brick fulfilling as a maximum limit a percentage of voids no greater than 30%. The present research aims to evaluate the quality control of King Kong type 18 hollow bricks on their properties such as compression, dimensional variation, warping, percentage of voids, absorption, porosity, specific weight, efflorescence, pH and conductivity for which it was reported 400 results, the masonry units are made up of 8 brick kiln brands such as Fortes, Ladinorte, Lark, Clasa, Itali, Pirámide, Lambayeque and Huanchaco. The research design is non-experimental, being the type of descriptive cross-sectional design, having as particularities of one or more variables in a population. The results show that the “Pyramid” brand has more optimal values with a compressive strength of 197 kg / cm² and complying with the dimensional variation 1% in length, 1% in width, 0% in height, an average warpage of 1 mm concavity and 0 mm convexity not exceeding the 2 mm indicated by the RNE E.070 and in the absorption test it meets all the marks due to variations from 10% to 15%, in terms of the percentage of voids it does not meet any of the marks because the E070 standard limits us a maximum of 30% of voids, in terms of suction it meets the Lark and Itali brands for having 12 and 14 g / cm² / min; However, the density test meets all the marks because it is above 1.70 g / cm³ according to the NTP 331.017 (2015). The Fortes brand is considered non-blooming because it has an intensity of less than 5%, considering it as thin veil and be resistant to shock; Also, the chemical quality of the bricks was evaluated, which the Huanchaco brickyard does not comply with because it contains 2.42 (dS / m) of salts and 5.57 of pH.

La ciudad de Trujillo está ubicada en una zona de alta sismicidad (zona 4) en su mayoría son construcciones informales utilizando ladrillos de resistencia y durabilidad bien bajas, por esto es necesario evaluar el control de la calidad de los ladrillos en las empresas formales y por ello se eligió los ladrillos cerámicos King Kong tipo 18 huecos industriales porque la norma RNE E.070, nos menciona que el ladrillo de cerámica debe cumplir con su resistencia y peso según su categoría; como también, debe manipularse con una sola mano y además por ser lo más usados en la industria de la construcción y de soportar la humedad, otra cualidad es que nos permite eliminar el ruido exterior de un ambiente a otro hasta en un 70 % y resiste altas temperaturas y también establece parámetros para la zona 4 según el mapa de zonificación sísmica, las cuales deben usarse ladrillos solido industriales para muros portantes mayores a cuatro pisos considerando un tipo de ladrillo solido o macizo cumpliendo como límite máximo un porcentaje de vacíos no mayor al 30%. La presente investigación se pretende evaluar el control de calidad de los ladrillos King Kong tipo 18 huecos sobre sus propiedades como compresión, variación dimensional, alabeo, porcentaje de vacíos, absorción, porosidad, peso específico, eflorescencia, pH y conductividad para lo cual se reportó 400 resultados, las unidades de albañilería están conformadas por 8 marcas de ladrilleras como fortes, ladrinorte, lark, clasa, itali, pirámide, Lambayeque y huanchaco. El diseño de investigación es no experimental, siendo el tipo de diseño transversal descriptivo, teniendo como particularidades de una o más variables en una población. Los resultados muestran que la marca “Pirámide” tiene valores más óptimos con una resistencia a la compresión de 197 kg/cm² y cumpliendo con la variación dimensional 1 % de largo, 1 % de ancho, 0% de alto, un alabeo promedio de 1 mm concavidad y 0 mm convexidad no sobrepasando los 2 mm indicados por el RNE E.070 y en el ensayo de absorción cumple todas las marcas por tener variaciones de 10 % al 15 %, en cuanto al porcentaje de vacíos no cumple ninguna de las marcas porque la norma E070 nos limita como máximo 30% de vacíos, en cuanto a la succión cumple las marcas Lark e Itali por tener 12 y 14 g/cm²/min; sin embargo, el ensayo de la densidad cumple todas las marcas porque se encuentra por encima del 1.70 g/cm³ según la NTP 331.017(2015), La marca Fortes se considera no eflorecido por tener una intensidad menor al 5% considerando como velo fino y ser resistente al golpe; también, se evaluó la calidad química de los ladrillos, la cual la ladrillera Huanchaco no cumple por contener 2.42 (dS/m) de sales y 5,57 de pH.
Note: Trujillo San Isidro
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Acosta Sánchez, Luis Alberto; Aguilar Villena, Roxana Milagros; Agreda Barbarán, Juan
Register date: 11-Oct-2021; 11-Oct-2021



This item is licensed under a Creative Commons License Creative Commons