Look-up in Google Scholar
Title: Influencia a la adición de fibras de plástico y metal, sobre la resistencia a la flexión en morteros para taludes
Advisor(s): Vásquez Alfaro, Ivan Eugenio
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 16-May-2018
Institution: Universidad Privada del Norte
Abstract: Existen diversos problemas que genera la construcción de carreteras y falta de sostén en superficies en donde se genera presión, generando deslizamientos, para esto se busca estructuras solidas con pendientes para resistir el peso y presión, que se genera, para lo cual la presente investigación tuvo como principal objetivo estudiar la influencia de la incorporación de SIKA FIBER FORCE PP48 y SIKA FIBER CHO 6535 NB, en las propiedades mecánicas del mortero convencional, siendo el caso de la resistencia a la flexión, en tres puntos y la proporción que se empleó, para esta investigación fue de 1 de cemento: 2 de arena con una relación agua/cemente de 0.50. En la elaboración de las probetas, para esta investigación se utilizó el Cemento Pacasmayo Portland Tipo I, agua potable de la ciudad de Trujillo y la arena fina traída de la cantera “San Idelfonso”, ubicada dentro de la provincia de Trujillo; se realizaron diversos ensayos a la arena tales como: análisis granulometrico (ASTM C136), contenido de humedad (ASTM 566), peso específico, absorción (ASTM C128) y peso unitario suelto y compactado (ASTM C29), así como la calidad físico-química (ASTM D4972). Para el conformado de probetas se reforzó con fibras, en diferentes adiciones 20,40,60,80 y 100 g, para SIKA FIBER CHO 6535 NB Y 5,10 y 15 gramos para SIKA FIBER FORCE PP48; se realizó el ensayo de resistencia a la flexión del mortero, para lo cual, se empleó la norma ASTM C293, en donde las probetas empleadas fueron de dimensiones 16 cm x 4 cm x 4 cm, curadas en agua y ensayadas a una edad de 28 días, de acuerdo a la NTP 399.602. Con la ejecución de esta investigación, se pudo concluir que los morteros para taludes, reforzado con SIKA FIBER CHO 6535 NB, alcanzaron valores superiores a los reforzados con SIKA FIBER FORCE PP48, llegando a un valor de hasta 262.4 Kg/cm2, cuando se reforzó con 100 gramos de dicha fibra, a comparación de los morteros reforzados con fibra polimerica, llegando a valores máximo de 162.4 Kg/cm2, determinando que en morteros para taludes, independientemente de la adición de fibra, SIKA FIBER CHO 6535 NB, este es el mejor componente usado como refuerzo, en mortero para taludes. Inclusive el costo, para la elaboración de los morteros para taludes, es económicamente accesibles, dado que el precio de SIKA FIBER FORCE PP48, es de S/.138, en un empaque de 5 kg., y de SIKA FIBER CHO 6535 NB, es de S/.203.70, pero en un empaque de 20 Kg., para lo cual independientemente de la cantidad de mortero a elaborar, la adición de fibras de metal es mucho más económico, porque en un equivalente a 5 Kg, el precio seria S/.50.90.

There are several problems generated by the construction of roads and lack of support on surfaces where pressure is generated, generating landslides, for this purpose solid structures with slopes are sought to resist the weight and pressure, which is generated, for which the present investigation had as main objective to study the influence of the incorporation of SIKA FIBER FORCE PP48 and SIKA FIBER CHO 6535 NB, in the mechanical properties of conventional mortar, being the case of the resistance to bending, in three points and the proportion that was used, for this investigation was 1 of cement: 2 of sand with a water / cement ratio of 0.50. In the elaboration of the test pieces, for this investigation the Cement Pacasmayo Portland Type I was used, drinking water of the city of Trujillo and the fine sand brought from the quarry "San Idelfonso", located within the province of Trujillo; various sand tests were performed such as: granulometric analysis (ASTM C136), moisture content (ASTM 566), specific gravity, absorption (ASTM C128) and loose and compacted unit weight (ASTM C29), as well as physical quality- Chemistry (ASTM D4972). For the forming of specimens, it was reinforced with fibers, in different additions 20,40,60,80 and 100 g, for SIKA FIBER CHO 6535 NB Y 5.10 and 15 grams for SIKA FIBER FORCE PP48; the mortar bending resistance test was carried out, for which the ASTM C293 standard was used, where the test pieces used were of dimensions 16 cm x 4 cm x 4 cm, cured in water and tested at an age of 28 days, according to NTP 399.602. With the execution of this investigation, it was concluded that the mortars for slopes, reinforced with SIKA FIBER CHO 6535 NB, reached higher values than those reinforced with SIKA FIBER FORCE PP48, reaching a value of up to 262.4 Kg / cm2, when reinforced with 100 grams of said fiber, compared to mortars reinforced with polymeric fiber, reaching maximum values of 162.4 Kg / cm2, determining that in mortar for slopes, regardless of the addition of fiber, SIKA FIBER CHO 6535 NB, this is the best component used as reinforcement, in mortar for slopes. Inclusive the cost, for the elaboration of the mortars for slopes, is economically accessible, since the price of SIKA FIBER FORCE PP48, is of S / .138, in a packaging of 5 kg., And of SIKA FIBER CHO 6535 NB, is of S / .203.70, but in a pack of 20 Kg., for which regardless of the amount of mortar to be processed, the addition of metal fibers is much cheaper, because in an equivalent to 5 Kg, the price would be S /.50.90.
Note: Trujillo San Isidro
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Azañedo Medina, Wiston; Agreda Barbaran, Juan Alejandro; Díaz García, Gonzalo Hugo
Register date: 21-May-2018; 21-May-2018



This item is licensed under a Creative Commons License Creative Commons