Look-up in Google Scholar
Title: Mejoramiento de la subrasante con geomallas multiaxiales tipo Tx140 y Tx160, aplicado a un tramo de la calle Alemania – La Molina - Cajamarca 2016
Advisor(s): Ravines Azañero, Irene
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 16-Sep-2016
Institution: Universidad Privada del Norte
Abstract: RESUMEN La presente tesis está orientada a mostrar técnicas distintas a las convencionales en el mejoramiento de la subrasante en vías de acceso, en zonas donde los suelos son blandos y de mala calidad, mediante el uso de geomallas multiaxiales para la estabilización de suelos. El presente documento muestra el diseño de subrasante con y sin geomalla multiaxial tomando como ámbito de aplicación un tramo de la calle Alemania – La molina - Cajamarca, cuyo suelo es del tipo limo arcilloso (CL), con valores de CBR de 2.5% y con presencia de agua. La utilización de geomallas multiaxiales en esta zona es inevitable para la estabilización de los suelos utilizando los parámetros de diseño necesarios como CBR, carga axial, presión de inflado de llantas, profundidad máxima de ahuellamientos y número de ejes pasantes; datos que luego fueron procesados con el software Spectra Pave 4.0. Como resultado se obtuvo el incremento de la capacidad de soporte de la subrasante y la reducción del espesor de mejoramiento, comparado con un diseño patrón, registrando un ahorro de material de 54% y 72% con las geomallas multiaxiales tipo Tx140 y Tx160 respectivamente.

ABSTRACT The present thesis is orientated to show technologies different from the conventional ones in the improvement of the sublow one in exit ramps, in zones where the soils are soft and of bad quality, by means of the use of multiaxial geogrids for the stabilization of soils. The present document shows the design of sublow with and without multiaxial geogrid taking a section of the street as an area of application Germany - Three mills - Cajamarca, whose soil is of the type clayey slime (CL), with CBR's values of 2.5 % and with water presence. The utilization of multiaxial geogrids in this zone is inevitable for the stabilization of the soils using the necessary design parameters like CBR, axial load, pressure of inflated of rims, maximum depth of ahuellamientos and number of axes assistants, information that then there was processed by the software Spectra Pave 4.0. Since result obtained the increase of the capacity of support of the sublow one and the reduction of the thickness of improvement, comparing with a design boss, registering a saving material of 54 % and 72 % with the multiaxial geogrids type Tx140 and Tx160 respectively.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Aguilar Aliaga, Orlando; Salazar Huamán, Erlyn; Urteaga Toro, Manuel
Register date: 5-Jul-2017



This item is licensed under a Creative Commons License Creative Commons