Look-up in Google Scholar
Title: Análisis comparativo entre la urea agroindustrial y un aditivo acelerante de fragua (Chema) en el concreto hidráulico
Advisor(s): Neyra Torres, Jose Luis
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 20-Aug-2023
Institution: Universidad Privada del Norte
Abstract: Los aditivos para concreto son sustancias químicas que son insumos que actúan químicamente al contacto del cemento en la modificación de algunas propiedades del cemento, tales como la resistencia a compresión a corto plazo, incrementar la trabajabilidad, reducir las proporciones de agua, ajustar el tiempo de fraguado, reducir la segregación, mejorar la bombeabilidad, entre otras las cuales pueden adaptadas en distintos contextos y climas de acuerdo al trabajo a realizar. En la presente investigación busca determinar ¿Como infuye la urea agroindustrial en el concreto hidráulico?, esto se da con la finalidad de acelerar el tiempo de fragua inicial y alcanzar la resistencia máxima en menos tiempo. Por otro lado, tenemos nuestro objeto de estudio que es la urea agroindustrial CO(NH2)2 la cual es una sustancia nitrogenada, incolora e hidroscópica de origen orgánico nada peligrosa también llamada acido carbónico de la diamida; esta es producida por muchos seres vivos para la eliminación del amoniaco de los organismos, se relaciona con un olor característico leve a amoniaco y el uso principal de la urea es como fertilizantes. Por consiguiente, se realizó el ensayo de consistencia normal, posteriormente se realizó el ensayo de aguja de vicat y por último se realizó la prueba de compresión con cubos; las muestras se llevaron de la siguientes combinaciones: concreto hidráulico, concreto hidráulico y un aditivo químico (CHEMA 3), concreto hidráulico y urea agroindustrial; esto con la finalidad de determinar la cantidad de agua ideal para cada aditivo aplicado a las pruebas ya mencionadas, teniendo un punto de comparación sobre la urea y el rendimiento para ser aplicada en el campo tendiendo así resultados confiables.

Concrete admixtures are chemical substances that are inputs that act chemically in contact with cement in the modification of some properties of cement, such as short-term compressive strength, increase workability, reduce water proportions, adjust setting time, reduce segregation, improve pumpability, among others, which can be adapted in different contexts and climates according to the work to be done. This research seeks to determine the influence of agro-industrial urea in hydraulic cement as a setting accelerating additive, with the aim of accelerating the initial setting time and achieving maximum strength in less time. On the other hand, we have our object of study which is the agro-industrial urea CO(NH2)2 which is a nitrogenous, colourless and hydroscopic substance of organic origin not dangerous also called carbonic acid of diamide; this is produced by many living beings for the elimination of ammonia from organisms, it is related to a slight characteristic odour of ammonia and the main use of urea is as fertilizer. Therefore, the normal consistency test was performed, then the vicat needle test was performed and finally the compression test with cubes was performed; the samples were taken from the following combinations: hydraulic concrete, hydraulic concrete and a chemical additive (CHEMA 3), hydraulic concrete and agro-industrial urea; this in order to determine the ideal amount of water for each additive applied to the tests already mentioned, having a point of comparison on the urea and the performance to be applied in the field, thus having reliable results.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Campos Vasquez, Neicer; Manturano Chipana, Ruben Kevin; Rabanal Chavez, Erick Humberto
Register date: 18-Jan-2024



This item is licensed under a Creative Commons License Creative Commons