Look-up in Google Scholar
Title: Análisis y diseño estructural de una edificación de 5 pisos de concreto armado en el distrito de El Tambo - Junín
Other Titles: Analysis and structural design of a five-story reinforced concrete building in the district of El Tambo - Junín
Advisor(s): Gálvez Arroyo, Mayra Evelyn
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01; https://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 13-Nov-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: El presente trabajo comprende el análisis y diseño de una estructura de concreto armado de cinco pisos sometido a cargas de gravedad y sismo, ubicada en el departamento de Junín con un uso destinada a una vivienda multifamiliar. El terreno cuenta con un área de 115.15 m2 y está compuesto por suelo rígido. El sistema predeterminado de la edificación corresponde a muros estructurales, tanto el análisis y diseño se realizará cumpliendo con los lineamientos que indica la norma E.060 “Concreto armado”, Norma E.030 “Diseño Sismorresistente” y la Norma E.020 “Cargas”. Para realizar el diseño de la estructura, primeramente, se contó con un plano arquitectónico de cinco niveles y una azotea. Con este se pudo definir correctamente la estructuración más adecuada que cumpla con los parámetros arquitectónicos en base a los criterios propuestos por el ingeniero Blanco (1994). Además, se realizó los conceptos de cálculo que predominarán para el diseño de los elementos estructurales Luego se procedió a realizar el predimensionamiento de los elementos estructurales como columnas, muros de corte, vigas y losas. Con estas dimensiones previas se desarrolla el análisis sísmico tanto estático como dinámico mediante el Software Etabs, los cuales deben cumplir con los principales lineamientos propuestos por la norma E.030. FormaUna vez ejecutado lo anterior, se procede con el diseño de los elementos estructurales considerando la norma E.060, ya que estos deben cumplir con los criterios de resistencia y corte. Según esto se brinda las conclusiones, recomendaciones y los planos estructurales que se obtuvieron en el análisis.​

The present work includes the analysis and design of a five-story reinforced concrete structure subjected to gravity and earthquake loads, located in the department of Junín with a use intended for a multi-family home. The land has an area of 115.15 m2 and is composed of rigid soil. The default building system corresponds to structural walls, both the analysis and design will be carried out in compliance with the guidelines indicated by Standard E.060 “Reinforced Concrete”, Standard E.030 “Eismic Resistant Design” and Standard E.020 “Loads”. To carry out the design of the structure, first, there was an architectural plan of five levels and a roof with which the most appropriate structure that complied with the architectural parameters could be correctly defined based on the criteria proposed by the engineer Blanco (1994). In addition, the calculation concepts that will be followed for the design of the structural elements were carried out. Then, the pre-sizing of the structural elements such as columns, shear walls, beams and slabs was carried out. With which, both static and dynamic seismic analysis is developed using Etabs, which must comply with the main guidelines proposed by the E.030 standard. FormaOnce the above has been executed, we proceed with the design of the structural elements onsidering the E.060 standard, since these must meet the resistance and shear criteria. According to this, the conclusions, recommendations and structural plans that were obtained in the analysis are provided.​
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Serrano Lazo, Malena Alessandra; Mejía Trejo, Paulo Israel
Register date: 26-Jan-2024



This item is licensed under a Creative Commons License Creative Commons