Buscar en Google Scholar
Registro completo de metadatos
Alvarez Miranda, David Humberto
Velarde Cayetano, Jean Adrian (es_PE)
Gomez Quinto, Royer Cristhian (es_PE)
2024-01-11T14:43:49Z
2024-01-11T14:43:49Z
2023-11-12
http://hdl.handle.net/10757/670968
En nuestro país se ha observado el gran problema que viene dándose desde hace muchos años atrás, el cual es la autoconstrucción de viviendas en zonas de peligro sísmico que en un futuro estas causaran una gran pérdida de vidas humanas frente a un movimiento sísmico, por lo que es importante e indispensable dar conocimiento a las personas sobre las edificaciones que van a realizar y que tipo de apoyo deben acudir con un profesional calificado. En el presente trabajo de investigación, se ha realizado una comparación de técnicas de reforzamiento tanto como el uso de la malla electrosoldada y geomalla en una vivienda común de Villa el Salvador con un sistema estructural de albañilería confinada. Primeramente, se ha elaborado una calibración de ensayos experimentales con malla electrosoldada, muro convencional y el refuerzo con geomalla para obtener las rotulas a utilizar en la modelación de un análisis estático no lineal. Asimismo, se ha desarrollado el modelamiento modal espectral de la vivienda teniendo como herramienta el software ETABS considerando las propiedades y características brindados por el expediente de la vivienda. Con el modelo computacional se ha obtenido las derivas y desplazamientos de los modos para luego verificar que muros del plano de vivienda tendrán que ser reforzados por las técnicas ya mencionadas. Seguidamente, se hace un análisis no lineal estático (ANLE) de la estructura con los datos recolectados de las calibraciones para la plasticidad del concreto y elemento confinado. El ANLE nos brinda la curva de capacidad de la estructura y con la representación bilineal de esta, se obtiene el punto de desempeño con el que se puede determinar el comportamiento de la estructura según el SEAOC VISION 2000. Este proceso se realiza en las dos técnicas de reforzamiento para luego realizar una evaluación de las técnicas de reforzamiento utilizadas.
In our country, the great problem that has been occurring for many years has been observed, which is the self-construction of houses in seismic danger zones that in the future will cause a great loss of human life in the face of a seismic movement, therefore that it is important and essential to give people knowledge about the buildings they are going to build and what type of support they should seek from a qualified professional. In the present research work, a comparison of reinforcement techniques has been carried out as well as the use of electrowelded mesh and geogrid in a common home in Villa el Salvador with a confined masonry structural system. Firstly, a calibration of experimental tests has been carried out with electrowelded mesh, conventional wall and reinforcement with geogrid to obtain the hinges to be used in the modeling of a non-linear static analysis. Likewise, modal spectral modeling of the home has been developed using the ETABS software as a tool, considering the properties and characteristics provided by the home file. With the computational model, the drifts and displacements of the modes have been obtained to then verify which walls of the housing plan will have to be reinforced by the techniques already mentioned. Next, a static nonlinear analysis (ANLE) of the structure is performed with the data collected from the calibrations for the plasticity of the concrete and confined element. The ANLE provides us with the capacity curve of the structure and with its bilinear representation, the performance point is obtained with which the behavior of the structure can be determined according to the SEAOC VISION 2000. This process is carried out in both techniques. of reinforcement to then carry out an evaluation of the reinforcement techniques used.
Trabajo de Suficiencia Profesional (es_PE)
application/pdf (en_US)
application/msword (en_US)
application/epub (en_US)
spa (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-sa/4.0/ (*)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
Repositorio Académico - UPC (es_PE)
Malla electrosoldada
Geomalla
Reforzamiento
Muros confinado
Vulnerabilidad sísmica
Comparativa de reforzamientos
Análisis estático no lineal
Punto de desempeño
Electrowelded mesh
Geogrid
Reinforcement
Confined walls
Seismic vulnerability
Comparison of reinforcements
Nonlinear static analysis
Performance point
Comparación de reforzamiento estructural de muros confinados de albañilería mediante mallas electro soldadas y geomallas en una vivienda de 3 pisos en el distrito de Villa el Salvador, Lima (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería (es_PE)
Ingeniería Civil (es_PE)
Licenciatura (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.01
https://purl.org/pe-repo/ocde/ford#2.00.00 (es_PE)
https://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
43931002
0000-0003-4614-2314 (es_PE)
75850936
73761573
732016 (es_PE)
Anza Moreau, Cesar Augusto
Delgadillo Ayala, Rick Milton
https://purl.org/pe-repo/renati/type#trabajoDeSuficienciaProfesional (es_PE)
Privada societaria



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons