Look-up in Google Scholar
Full metadata record
Gálvez Arroyo, Mayra Evelyn
Cruz Saavedra, Jaime Josehc (es_PE)
Mayhua Paucar, Boris Zosimo (es_PE)
2023-12-28T08:14:17Z
2023-12-28T08:14:17Z
2023-11-13
http://hdl.handle.net/10757/670231
La presente tesis tiene como objetivo principal realizar el análisis y diseño estructural de los pabellones A, B y C de la Institución Educativa N° 740 ubicada en el barrio el Porvenir del Distrito de Huancan, Huancayo-Junín, cumpliendo con las exigencias de la norma E.030 para obtener una infraestructura sismo resistente. Asimismo, diseñar losas, vigas, columnas y placas, cumpliendo con las exigencias establecidas por la norma E.60 de concreto armado. Para el modelamiento y análisis sísmico de dichos pabellones se utilizará el Software Etabs corroborando los cálculos mediante una hoja Excel. Los sistemas estructurales que se trabajaron en los pabellones A y B, fue de albañilería en el eje Y, y de muros estructurales en el eje X. Por otro lado, el pabellón C el sistema estructural trabajado fue de muros estructurales. Los resultados arrojados por el análisis estructural presentan derivas máximas inelásticas de 0.0024 en el eje X y de 0.001 en el eje Y. El cual según la norma estas cumplen con las derivas máximas permisibles que son 0.007 para edificaciones de concreto armado y 0.005 para edificaciones de albañilería. Asimismo, se concluyó que los pabellones no presentan ningún tipo de irregularidad tanto en planta como en altura. Los detalles de diseños de los elementos antes mencionados se muestran en el apartado de anexos, donde se presentan los planos estructurales de los techos, columnas y placas.
The main objective of this thesis is to carry out the analysis and structural design of pavilions A, B and C of the Educational Institution No. 740 located in the El Porvenir neighborhood of the Huancan District, Huancayo-Junín, complying with the requirements of the standard E.030 to obtain an earthquake-resistant infrastructure. Likewise, design slabs, beams, columns, and plates, complying with the requirements established by the reinforced concrete standard E.60. For the modeling and seismic analysis of these pavilions, the Etabs Software will be used, corroborating the calculations using an Excel sheet. The structural systems that were worked on in pavilions A and B were masonry on the Y axis, and structural walls on the X axis. On the other hand, in pavilion C the structural system worked on was structural walls. The results obtained from the structural analysis present maximum inelastic drifts of 0.0024 on the X axis and 0.001 on the Y axis. Which according to the standard these comply with the maximum allowable drifts which are 0.007 for reinforced concrete buildings and 0.005 for masonry buildings. Likewise, it was concluded that the pavilions do not present any type of irregularity both in plan and height. The design details of the elements are shown in the annexes section, where the structural plans of the ceilings, columns and plates are presented.
Trabajo de Suficiencia Profesional (es_PE)
application/pdf (en_US)
application/msword (en_US)
application/epub (en_US)
spa (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-sa/4.0/ (*)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
Repositorio Académico - UPC (es_PE)
Diseño estructural
Sismorresistente
Colegio
Infraestructura
Análisis sísmico
Structural design
Earthquake resistance
School
Infrastructure
Seismic analysis
Análisis y diseño estructural de los pabellones A, B y C de la Institución Educativa N° 740 del barrio Porvenir del Distrito de Huancan, Huancayo-Junín (es_PE)
Analysis and structural design of pavilions A, B and C of Educational Institution No. 740 of the Porvenir neighborhood of the Huancan District, Huancayo-Junín
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería (es_PE)
Ingeniería Civil (es_PE)
Licenciatura (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.03
https://purl.org/pe-repo/ocde/ford#2.00.00 (es_PE)
https://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
46287557
0009-0005-3196-0017 (es_PE)
77073350
71030606
732016 (es_PE)
Serrano Lazo, Malena Alessandra
Mejía Trejo, Paulo Israel
https://purl.org/pe-repo/renati/type#trabajoDeSuficienciaProfesional (es_PE)
Privada societaria



This item is licensed under a Creative Commons License Creative Commons