Look-up in Google Scholar
Title: Utilización del poliuretano reciclado para evaluar las propiedades mecánicas en mezclas asfálticas convencionales para pavimentos urbanos en Trujillo 2022
Advisor(s): Henríquez Ulloa, Juan Paul Edward
OCDE field: https://purl.org/pe-repo/ocde/ford#2.11.00
Issue Date: 2024
Institution: Universidad Privada Antenor Orrego
Abstract: La investigación propuesta es el resultado del interés creativo y resuelto de encontrar un material que actue como soporte y brinde atributos necesarios a una mezcla asfáltica en caliente (MAC), este componente, poliuretano reciclado (PUR), se evaluó, es decir se identificó, analizó y se determinó las propiedades mecánicas mediante el ensayo “Marshall”. El planteamiento de estudio se canalizó con fines prácticos, experimental-cuantitativa. Se caracterizó los materiales pétreos, mediante ensayos de granulometría, MAC-2, 47% de piedra chancada de ½”, 33% de arena chancada,18% de arena zarandeada, 2% de cemento portland I y 0.5% de aditivo mejorador de adherencia. Los procedimientos de elaboración de las muestras para su evaluación se realizaron en el Laboratorio, certificándolo en fichas técnicas y de cumplimiento con los requerimientos del Manual de carreteras RD N° 22-2013-MTC/14, las Normas Técnicas CE.0.10, Pavimentos Urbanos, referenciados en el RNE-2019 en la pág. 681. Se utilizó asfalto PEN 60/70 en la mezcla convencional o patrón con porcentajes de 4.5%,5%,5.5%,6%,6.5% y 7% y adicionando PUR, en porcentajes: 1.0%,1.5% ,2.0% ,2.5 % y 3.0% con respecto al total del asfalto. Este bitumen se eligió de acuerdo a la norma, para clima templado, temperatura de 7°C- 24°C. Finalmente, la mezcla asfáltica convencional o patrón obtuvo un bitumen óptimo de 5.9 % y la mezcla asfáltica modificada, obtuvo mejores resultados con un bitumen de 5.5 % y 2.5% de poliuretano reciclado PUR

This research is based on the innovation and development of a hot mix asphalt (HMA), where recycled polyurethane (PUR) is used, incorporating it into a conventional asphalt mix. The main objective was to evaluate its influence on the use of PUR in the asphalt mixture and significant performances were obtained for its subsequent use in urban pavements in the city of Trujillo. The mechanical properties of the asphalt mixture were previously identified, analyzed and indicated. hot (HMA), using the “Marshall” test. The type of study according to the orientation or purpose is applied, quasi-experimental-quantitative research. The stone materials were characterized by granulometry tests, HMA -2, 47% ½” crushed stone, 33% crushed sand, 18% screened sand, 2% Portland cement I and 0.5% adhesion improving additive. The procedures for preparing the samples for subsequent evaluation were carried out in the Laboratory, certifying them in technical sheets and compliance with the requirements of the Highway Manual RD No. 22-2013-MTC/14, the Technical Standards CE.0.10, Urban Pavements referenced in the RNE-2019 on page. 681. PEN 60/70 asphalt was used in the conventional mixture with percentages of 4.5%, 5%, 5.5%, 6%, 6.5% and 7% and adding PUR, in percentages: 1.0%, 1.5%, 2.0%, 2.5 % and 3.0% with respect to the total asphalt. This bitumen is chosen according to the standard, for a temperate climate, temperature of 7°C- 24°C. Finally, the conventional asphalt mixture obtained an optimal bitumen of 5.9% and the modified asphalt mixture obtained better results with a bitumen of 5.5% and 2.5% of PUR recycled polyurethane
Discipline: Maestría en Ingeniería
Grade or title grantor: Universidad Privada Antenor Orrego. Escuela de Postgrado
Grade or title: Maestra en Transportes y Convervación Vial
Juror: Narváez Aranda, Ricardo Andrés; Hurtado Zamora, Oswaldo; Cabanillas Quiroz, Guillermo Juan
Register date: 9-Jul-2024



This item is licensed under a Creative Commons License Creative Commons