Look-up in Google Scholar
Title: Comportamiento estructural en muro de tierra, reforzados con polietileno en zona de arriostramiento bajo carga lateral dinámica
Advisor(s): Galicia Guarniz, William Conrad
Issue Date: 2020
Institution: Universidad Privada Antenor Orrego
Abstract: Nuestro proyecto de investigación es de carácter experimental, ya que tomamos como referencia principal la utilización del material de adobe, que sigue siendo uno de las materias primas principales para la construcción de viviendas, en zonas altas o rurales en el Perú. Es por ello que teniendo como referencia los cambios que ejercen en el transcurrir del tiempo planteamos la forma de mejorar su interacción entre unidades de albañilería aplicando el Polietileno PEBD en sus arriostres dando más sostenibilidad al muro, bajo ensayos de carga lateral dinámica. Para lo cual, realizaremos los ensayos de resistencia de la compresión axial de la unidad (f’b), resistencia a la compresión axial en pila (f’m), de tracción diagonal (v’m); con estos resultados realizaremos un prototipo de muro de tierra con polietileno PEBD en sus arriostres de confinamiento con 20%(14x19x0.5) cm, 40%(15x12x0.5) cm y 60%(23x16x0.5) cm de la longitud del muro. Los resultados de estos ensayos a escala reducida, se realizarán atreves de una mesa vibratoria (Tesis “ENSAYO DE PÓRTICO A ESCALA EN MESA DE VIBRACIÓN DE 1 GRADO DE LIBERTAD”, de la Escuela Profesional de Ingeniería Civil), implementándole un sensor de efecto hall donde se encontrará el desplazamiento lateral máximo y mínimo para así calcular la fuerza lateral y la rigidez de la estructura

Our research project is experimental in nature, since we take as a main reference the use of adobe material, which remains one of the main raw materials for housing construction, in high or rural areas in Peru. That is why, taking as a reference the changes that they exert over time, we propose how to improve their interaction between masonry units by applying PEBD Polyethylene in their bracing, giving more sustainability to the wall, under dynamic lateral load tests. For which, we will perform the tests of resistance of the axial compression of the unit (f’b), resistance to axial compression in stack (f’m), of diagonal traction (v’m); With these results we will make a prototype of a PEBD polyethylene ground wall in its confinement bracing with 20% (14x19x0.5) cm, 40% (15x12x0.5) cm and 60% (23x16x0.5) cm of the wall length. The results of these small-scale tests are carried out through a vibrating table (Thesis “1 DEGREE FREEDOM VIBRATION TABLE ON A SCALE PORCH”, from the Professional School of Civil Engineering), implementing a hall effect sensor where the maximum and minimum lateral displacement is selected for thus calculate the lateral force and stiffness of the structure
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada Antenor Orrego. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Register date: 27-Aug-2020



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.