Look-up in Google Scholar
Full metadata record
Burgos Sarmiento, Tito Alfredo
Toledo Landeras, Gianfranco Fabrizio
Toledo Landeras, Gianfranco Fabrizio
2024-07-03T20:36:39Z
2024-07-03T20:36:39Z
2024
https://hdl.handle.net/20.500.12759/32553
El presente informe de investigación presentó como su objetivo general, el poder llegar a realizar el estudio comparativo entre el Método AASHTO 93 y Método racional; los cuales son empleados para el diseño estructural de un pavimento flexible, con la finalidad de llegar a determinar el mejor diseño de un pavimento flexible en los sectores 3 y 4 de Alto Trujillo. Esta investigación es de tipo aplicada, descriptivo, para el desarrollo de la investigación se aplicó el método no experimental, en el cual, se presentó un corte transversal y con un diseño comparativo, para tal caso, se realizó una recolección datos realizados en laboratorio, en campo e informes técnicos. Como resultado, al desarrollar el Método Aashto 93 se obtuvo un espesor de pavimento asfaltico de 7 cm y al aplicar el método racional se obtuvo un espesor de 10 cm de pavimento asfaltico, además, se pudo ver que, dentro del ámbito económico, el método Racional presentó un elevado costo en comparación con el diseño brindado por el método Aashto 93. Por lo tanto, se pudo llegar a concluir que el diseño más óptimo a nivel estructural es el brindado por el Método Racional, pero a nivel económico, se sobrepone el diseño brindado por el Método AASHTO 93 (es_PE)
This research report presented as its general objective, to be able to carry out the comparative study between the AASHTO 93 Method and the Rational Method; which are used for the structural design of a flexible pavement, with the purpose of determining the best design of a flexible pavement in sectors 3 and 4 of Alto Trujillo. This research is of an applied, descriptive type, for the development of the research the non-experimental method was applied, in which a cross section was presented and with a comparative design, for this case, a data collection was carried out in the laboratory, in the field and technical reports. As a result, when developing the Aashto 93 Method, an asphalt pavement thickness of 7 cm was obtained and when applying the rational method, a 10 cm thickness of asphalt pavement was obtained. In addition, it could be seen that, within the economic sphere, the method Rational presented a high cost compared to the design provided by the Aashto 93 method. Therefore, it was possible to conclude that the most optimal design at a structural level is the one provided by the Rational Method, but at an economic level, it overlaps the design provided by AASHTO Method 93 (es_PE)
Tesis (es_PE)
application/pdf (es_PE)
spa (es_PE)
Universidad Privada Antenor Orrego (es_PE)
T_CIVIL_2526
info:eu-repo/semantics/closedAccess (es_PE)
https://creativecommons.org/licenses/by/4.0/ (es_PE)
Pavimento flexible (es_PE)
método Aashto 93 (es_PE)
Mecanístico Empírico (es_PE)
Análisis comparativo del diseño estructural del pavimento flexible entre metodologías AASHTO 93 y Racional, Sectores 3, 4, Alto Trujillo, La Libertad (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Privada Antenor Orrego. Facultad de Ingeniería (es_PE)
Ingeniería Civil (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
http://purl.org/pe-repo/ocde/ford#2.01.00 (es_PE)
http://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
42141206
https://orcid.org/0000-0003-2143-1566 (es_PE)
73176480
732016 (es_PE)
Vargas López, Segundo Alfredo
Panduro Alvarado, Elka
Salazar Perales, Álvaro Fernando
http://purl.org/pe-repo/renati/type#tesis (es_PE)
Privada asociativa



This item is licensed under a Creative Commons License Creative Commons