Look-up in Google Scholar
Title: Aislamiento térmico para disminuir el flujo de calor en la superficie lateral del secador de lecho fluidizado de la facultad de industrias alimentarias de la Universidad Nacional de la Amazonía Peruana
Advisor(s): Salas Barrera, Fernando Javier
OCDE field: https://purl.org/pe-repo/ocde/ford#2.11.04
Issue Date: 2023
Institution: Universidad Nacional de la Amazonía Peruana
Abstract: The objective general of the present work of thesis was: selling off the thermal insulation to decrease the heat flow in the lateral surface of the drier of bed fluidized of the FIA-UNAP. For that matter has come true a revision on the whole information relating to the transferential mechanisms of heat, by means of the one that the relation between the lost heat flow, the thickness of the thermal insulation and the temperature of the lateral surface of the mentioned drier. Finally, came true fifteen (15) simulations of said relation, to observe that the lost heat flow diminishes of insignificant way. Therefore, investigation has quantitative focus, it is somewhat diligent with explanatory level of deepening and I design correlational. The results of fifteen simulations of said relation, show that the lost heat flow, he decreases its value to a large extent from 301.241 W if ??At = 0 m, even 195.748 W if ??At = 0.04 m. From ??At = 0.04 m, the lost heat flow diminishes of insignificant way even 195.557 W if ??At = 0.05 m. For all what's mentioned the lines arrives, it can be said that in the present work of thesis has come true with the general objective lens and in turn he has tried on his general.

El objetivo general del presente trabajo de tesis fue: realizar el aislamiento térmico para disminuir el flujo de calor en la superficie lateral del secador de lecho fluidizado de la FIA-UNAP. Para eso se ha realizado una revisión sobre toda la información concerniente a los mecanismos de transferencia de calor, mediante la cual se ha podido determinar la relación entre el flujo de calor perdido, el espesor del aislante térmico y la temperatura de la superficie lateral exterior de dicho secador. Por último, se realizó quince (15) simulaciones de dicha relación, hasta observar que el flujo de calor perdido disminuya de forma insignificante. Por lo tanto, la investigación tiene enfoque cuantitativo, es del tipo aplicada con nivel de profundización explicativo y diseño correlacional. Los resultados de las quince (15) simulaciones de dicha relación, muestran que el flujo de calor perdido, disminuye su valor en gran medida desde 301.241 W si ??At = 0 m, hasta 195.748 W si ??At = 0.04 m. A partir de ??At = 0.04 m, el flujo de calor perdido disminuye de forma insignificante hasta 195.557 W si ??At = 0.05 m. De esta forma, se ha determinado que el espesor adecuado del aislante térmico (lana de vidrio) debe ser igual a 0.05 m. Por todo lo mencionado líneas arriba, se puede decir que en el presente trabajo de tesis se ha cumplido con el objetivo general y a su vez se ha probado la hipótesis general.
Discipline: Ingeniería Química
Grade or title grantor: Universidad Nacional de la Amazonía Peruana. Facultad de Ingeniería Química
Grade or title: Ingeniero(a) Químico(a)
Juror: García Pérez, Víctor; Cornelio Chujutalli, Miguel Ángel; Delgado Céspedes, Alcides Armando
Register date: 10-Mar-2023



This item is licensed under a Creative Commons License Creative Commons