Bibliographic citations
This is an automatically generated citacion. Modify it if you see fit
Depaz, M., Paitanmala, H. (2024). Análisis comparativo entre la supervisión de obra de una edificación por fotogrametría y modelo AS-Built [Universidad de Lima]. https://hdl.handle.net/20.500.12724/20770
Depaz, M., Paitanmala, H. Análisis comparativo entre la supervisión de obra de una edificación por fotogrametría y modelo AS-Built []. PE: Universidad de Lima; 2024. https://hdl.handle.net/20.500.12724/20770
@misc{renati/235792,
title = "Análisis comparativo entre la supervisión de obra de una edificación por fotogrametría y modelo AS-Built",
author = "Paitanmala Nuñez, Hans Jhonny",
publisher = "Universidad de Lima",
year = "2024"
}
Title: Análisis comparativo entre la supervisión de obra de una edificación por fotogrametría y modelo AS-Built
Other Titles: Comparative analysis between work supervision of a building by photogrammetry and AS-Built model
Advisor(s): Luna Torres, Ana Felícita
Keywords: Pendiente
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 2024
Institution: Universidad de Lima
Abstract: Al momento de realizar una supervisión de obra es usual pedir actualizaciones o
levantamientos para obtener los datos de la situación actual de la misma, que por lo
general se realizan mediante métodos tradicionales, generando retrabajos que requieren
mucho tiempo y ocasionando un aumento de los costos (Ibaceta, 2018). Por ello, se
realizará una comparación entre el uso de fotogrametría y el modelo tradicional,
utilizándose como guía un modelo As-Built, el cual se generará a través de
levantamientos topográficos tradicionales que son plasmados en las actualizaciones As-
Built con la última información a través de modelos 3D y planos 2D. La presente tesis
tiene como objetivo comparar los resultados obtenidos en la supervisión de obra de una
edificación por fotogrametría y compararlo con el modelo As-Built. Además, se
compararán los procesamientos de datos realizados en dos softwares fotogramétricos para
definir la precisión que se puede obtener como resultado del uso de esta nueva tecnología.
Se observó que, en todas las comparaciones realizadas, el software ContextCapture posee
mayor precisión que Pix4D. Asimismo, basándonos en los resultados de los Quality
Reports ambos softwares cumplen la precisión necesaria para una supervisión de obra en
una edificación. Mientras que, en la comparación realizada entre la nube de puntos de
cada software y el Modelo As-built, ambos softwares no cumplen con la precisión
requerida para dicha supervisión. La metodología científica de la investigación usada en
este trabajo es hipotético deductivo, es decir, en la elaboración del problema y, como
consecuencia, proponer hipótesis relacionadas con la pregunta de investigación, las
cuales serán o no confirmadas en el tiempo de la investigación. En cuanto a los
procedimientos metodológicos, a esta investigación de tesis se suman aspectos mixtos,
en el sentido de considerar datos documentales y análisis de resultados.
When carrying out a construction supervision, it is usual to request updates or surveys to obtain data on the current situation of the same, which are generally carried out using traditional methods, generating rework that requires a lot of time and causing an increase in costs (Ibaceta, 2018). For this reason, a comparison will be made between the use of photogrammetry and the traditional model, using an As-Built model as a guide, which will be generated through traditional topographic surveys that are reflected in the As- Built updates with the latest information available. through 3D models and 2D plans. The objective of this thesis is to compare the results obtained in the construction supervision of a building by photogrammetry and compare it with the As-Built model. In addition, the data processing carried out in two photogrammetric software will be compared to define the precision that can be obtained because of the use of this new technology. It was observed that, in all the comparisons carried out, the ContextCapture software has greater precision than Pix4D. Likewise, based on the results of the Quality Reports, both software meets the necessary precision for construction supervision in a building. While, in the comparison made between the point cloud of each software and the As-built Model, both softwares do not meet the precision required for said supervision. The scientific research methodology used in this work is hypothetical-deductive, that is, in the elaboration of the problem and, therefore, proposing hypotheses related to the research question, which will or will not be confirmed at the time of the research. Regarding the methodological procedures, mixed aspects are added to this thesis research, in the sense of considering documentary data and analysis of results.
When carrying out a construction supervision, it is usual to request updates or surveys to obtain data on the current situation of the same, which are generally carried out using traditional methods, generating rework that requires a lot of time and causing an increase in costs (Ibaceta, 2018). For this reason, a comparison will be made between the use of photogrammetry and the traditional model, using an As-Built model as a guide, which will be generated through traditional topographic surveys that are reflected in the As- Built updates with the latest information available. through 3D models and 2D plans. The objective of this thesis is to compare the results obtained in the construction supervision of a building by photogrammetry and compare it with the As-Built model. In addition, the data processing carried out in two photogrammetric software will be compared to define the precision that can be obtained because of the use of this new technology. It was observed that, in all the comparisons carried out, the ContextCapture software has greater precision than Pix4D. Likewise, based on the results of the Quality Reports, both software meets the necessary precision for construction supervision in a building. While, in the comparison made between the point cloud of each software and the As-built Model, both softwares do not meet the precision required for said supervision. The scientific research methodology used in this work is hypothetical-deductive, that is, in the elaboration of the problem and, therefore, proposing hypotheses related to the research question, which will or will not be confirmed at the time of the research. Regarding the methodological procedures, mixed aspects are added to this thesis research, in the sense of considering documentary data and analysis of results.
Link to repository: https://hdl.handle.net/20.500.12724/20770
Discipline: Ingeniería Civil
Grade or title grantor: Universidad de Lima. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Viteri Valiente, Víctor Jesús; Salinas Saavedra, José Roberto; Power Porto, George Félix
Register date: 21-Jun-2024
This item is licensed under a Creative Commons License