Look-up in Google Scholar
Full metadata record
Quiroz Flores, Juan Carlos
Ortega Leguia, Araceli Nicol Lucia
Vargas Purizaca, Lesly Fiorella
2024-01-26T15:20:28Z
2024-01-26T15:20:28Z
2023
Ortega Leguia, A. N. L. & Vargas Purizaca, L. F. (2023). Production Model Based on Lean Tools to Increase the Overall Efficiency of the Equipment in the Sole Pressing Process of a Footwear Company [Tesis para optar el Título Profesional de Ingeniero Industrial, Universidad de Lima]. Repositorio institucional de la Universidad de Lima. https://hdl.handle.net/20.500.12724/19819 (es_PE)
https://hdl.handle.net/20.500.12724/19819
La presente investigación se realizó en una empresa productora de suelas de caucho de la industria del calzado en el Perú, la cual pertenece al sector manufacturero. En este sector se identificaron varios problemas que afectan la Eficiencia General de los Equipos (OEE) de las pequeñas y medianas empresas, ya sea por una gran cantidad de tiempos muertos, baja disponibilidad y rendimiento de los equipos o baja calidad, entre otros. Este estudio tiene como objetivo principal mejorar el OEE de acuerdo con el estándar mundial de la industria (85%). La solución propuesta implementó un modelo de producción en el que se aplicaron las metodologías y herramientas SMED, TPM y Poka-Yoke. Considerando ello se realizó la simulación de la situación actual y la situación mejorada con el software Arena. Además, se demostró que el modelo propuesto mejoró el OEE a 86,17% dado que la disponibilidad, el rendimiento y la calidad mejoraron al 95,85%, 89,95% y 99,94%, respectivamente. Finalmente, esta investigación se realizó para contribuir al crecimiento del sector y ser un referente para empresas con procesos similares que quieran incrementar el OEE. (es_PE)
The present investigation was carried out in a rubber soles production company in the footwear industry in Peru, which belongs to the manufacturing sector. In this sector, several problems affecting the Overall Equipment Effectiveness (OEE) of small and medium-sized companies were identified, either due to a large amount of downtime, low availability and performance of equipment, or low quality, among others; this study has its main objective to improve OEE according to the global industry standard (85%). The proposed solution implemented a production model in which SMED, TPM, and Poka-Yoke methodologies were applied. With this, the simulation of the current and the improved situation was carried out with the Arena software. Additionally, it was demonstrated that the proposed model improved the OEE to 86.17% because availability, performance, and quality improved to 95.85%, 89.95%, and 99.94%, respectively. Finally, this research was done to contribute to the sector's growth and to be a reference for companies with similar processes that want to increase OEE. (en_EN)
application/pdf
spa
Universidad de Lima
info:eu-repo/semantics/restrictedAccess (*)
Repositorio Institucional Ulima
Universidad de Lima
Industria del calzado (es_PE)
Producción eficiente (es_PE)
Pequeñas y medianas empresas (es_PE)
Footwear industry (es_PE)
Lean manufacturing (es_PE)
Small business (es_PE)
Ingeniería industrial / Tecnología de procesos (es_PE)
Production Model Based on Lean Tools to Increase the Overall Efficiency of the Equipment in the Sole Pressing Process of a Footwear Company (es_PE)
info:eu-repo/semantics/bachelorThesis
Universidad de Lima. Facultad de Ingeniería y Arquitectura (es_PE)
Ingeniería Industrial (es_PE)
Título profesional (es_PE)
Ingeniero Industrial (es_PE)
PE
https://purl.org/pe-repo/ocde/ford#2.11.04
http://purl.org/pe-repo/renati/level#tituloProfesional (*)
10300285
https://orcid.org/0000-0003-1858-4123
72867047
76289818
722026
Flores Pérez, Alberto Enrique
Collao Diaz, Martin Fidel
Quiroz Flores, Juan Carlos
https://purl.org/pe-repo/renati/type#tesis (*)
Privada asociativa



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.