Look-up in Google Scholar
Full metadata record
Quiroz Flores, Juan Carlos
Pacora Valverde, Alejandra Lisseth
Valenzuela Ramos, Manuel Alejandro
2024-01-25T14:33:11Z
2024-01-25T14:33:11Z
2023
Pacora Valverde, A. L & Valenzuela Ramos, M. A. (2023). Model of Optimization of Production Based on the Application of Lean Tools to Increase Productivity in Footwear Manufacturing SMEs [Tesis para optar el Título Profesional de Ingeniero Industrial, Universidad de Lima]. Repositorio institucional de la Universidad de Lima. https://hdl.handle.net/20.500.12724/19774 (es_PE)
https://hdl.handle.net/20.500.12724/19774
The demand for footwear in Peru has increased significantly in recent years even though domestic production has decreased, on the other hand, it has been shown that imports have grown substantially. This shows that the domestic sector has difficulties in offering good quality products, which is directly related to low productivity and lack of innovation. In this sense, an integral Lean-SLP model is proposed based on the combination of tools such as total redesign of facilities, 5s, process standardization, work design, and Jidoka to improve the current productivity of 0.56 generated by deficient and non-standardized processes. The model was validated through arena software where a cycle time reduction of 42.95% and a productivity increase of 22.5% were obtained. This proposal allows SMEs in the footwear sector to be more competitive in the foreign market by producing shoes of higher quality and therefore better acceptance. (en_EN)
La demanda de calzado en el Perú ha aumentado significativamente en los últimos años a pesar de que la producción nacional ha disminuido, por otro lado, se ha demostrado que las importaciones han crecido sustancialmente. Esto demuestra que el sector interno tiene dificultades para ofrecer productos de buena calidad, lo que está directamente relacionado con la baja productividad y la falta de innovación. En este sentido se propone un modelo integral Lean-SLP basado en la combinación de herramientas como rediseño total de instalaciones, 5s, estandarización de procesos, diseño de trabajo y Jidoka para mejorar la productividad actual de 0.56 generada por procesos deficientes y no estandarizados. El modelo fue validado a través del software arena donde se obtuvo una reducción del tiempo de ciclo del 42,95% y un aumento de productividad del 22,5%. Esta propuesta permite a las Pymes del sector calzado ser más competitivas en el mercado exterior al producir zapatos de mayor calidad y por tanto de mejor aceptación. (es_PE)
application/pdf
spa
Universidad de Lima (es_PE)
info:eu-repo/semantics/openAccess (*)
https://creativecommons.org/licenses/by-nc-sa/4.0/ (*)
Repositorio Institucional Ulima
Universidad de Lima
Producción eficiente (es_PE)
Productividad (es_PE)
Pequeñas y medianas empresas (es_PE)
Productivity (es_PE)
Lean manufacturing (es_PE)
Small business (es_PE)
Industria del calzado (es_PE)
Footwear industry (es_PE)
Ingeniería industrial / Tecnología de procesos (es_PE)
Model of Optimization of Production Based on the Application of Lean Tools to Increase Productivity in Footwear Manufacturing SMEs (es_PE)
info:eu-repo/semantics/bachelorThesis
Universidad de Lima. Facultad de Ingeniería y Arquitectura (es_PE)
Ingeniería Industrial (es_PE)
Título Profesional (es_PE)
Ingeniero Industrial (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.11.04
http://purl.org/pe-repo/renati/level#tituloProfesional (*)
10300285
https://orcid.org/0000-0003-1858-4123
75960837
71784365
722026
Flores Pérez, Alberto Enrique
Taquía Gutiérrez, José Antonio
Quiroz Flores, Juan Carlos
https://purl.org/pe-repo/renati/type#tesis (*)
Privada asociativa



This item is licensed under a Creative Commons License Creative Commons