Look-up in Google Scholar
Full metadata record
Gudiel Cárdenas, Mitsy Elena
Carreño Flores, Alexandra Jhenifer
Cornejo Pumacajia, Luigi Fhaust
2023-01-04T13:47:25Z
2023-01-04T13:47:25Z
2022-11-11
https://hdl.handle.net/20.500.12557/5131
La investigación denominada:” Caracterización físico-mecánica de un mortero de concreto de cemento portland tipo IP añadido con aditivo experimental EPS90, en la ciudad de cusco”, consiste en la adición del aditivo experimental a la mezcla de mortero en 3%,5% y 7% del peso de cemento, así mismo se realizó muestras sin aditivo experimental EPS90. El primer ensayo que se realizó para el mortero en estado endurecido fue el de resistencia a compresión, este ensayo se realizó de acuerdo a la NTP 334.051, en el cual las muestras de cubos de mortero de 50mm de lado son sometidas a una fuerza a compresión. La resistencia a compresión del mortero modificado al 3% nos dio mayor resistencia que el resto de porcentajes. El segundo ensayo que se realizo fue de adherencia a cizalle, este ensayo se realizó según la norma chilena (NCh)167, para el caso del mortero modificado al 3% realizado a los 28 días de edad, nos dio un resistencia superior del resto de porcentajes, cabe resaltar que este ensayo se realizó para 14, 21 y 28 días de edad, observando que para el caso del mortero modificado al 7% a los 14 días de edad, se duplico la adherencia respecto el resto de porcentajes y además se observó que mientras aumenta la edad esta adherencia se mantiene casi constante para este porcentaje. El tercer ensayo que se realizó, fue el de fluidez de mortero, este ensayo se realizó tanto para medir la fluidez de cubos de mortero y adherencia a cizalle, dándonos una mayor fluidez al 3% para ambos casos, siendo este mortero más trabajable que el resto de porcentajes. El cuarto ensayo que se realizo fue el de tiempo de fraguado, este ensayo se realizó para 3 rangos de temperaturas, siendo estas temperaturas altas, medias y bajas, el tiempo de fraguado que tienen las muestras modificadas aumenta mientras más aditivo experimental EPS90 contenga, también este varía de acuerdo a la temperatura que fue realizado, para el caso de temperaturas bajas nos dio mayor tiempo de fraguado que el resto de temperaturas. (es_PE)
The research called: "Physical-mechanical characterization of a Portland cement concrete mortar type IP added with experimental additive EPS90, in the city of Cusco", consists of the addition of the experimental additive to the mortar mixture at 3%, 5% and 7% of the weight of cement, likewise samples were made without experimental additive EPS90. The first test that was carried out for the mortar in the hardened state was that of compressive strength, this test was carried out in accordance with NTP 334.051, in which the samples of mortar cubes with 50mm sides are subjected to a compressive force. The compressive strength of the 3% modified mortar gave us greater strength than the rest of the percentages. The second test that was carried out was shear adhesion, this test was carried out according to the Chilean standard (NCh)167, in the case of the 3% modified mortar carried out at 28 days of age, it gave us a higher resistance than the rest of the percentages, it should be noted that this test was carried out for 14, 21 and 28 days of age, noting that in the case of the 7% modified mortar at 14 days of age, adherence doubled with respect to the rest of the percentages and it was also observed that as age increases, this adherence remains almost constant for this percentage. The third test that was carried out was that of mortar fluidity, this test was carried out both to measure the fluidity of mortar cubes and shear adhesion, giving us a greater fluidity at 3% for both cases, this mortar being more workable than the rest of the percentages. The fourth test that was carried out was the setting time, this test was carried out for 3 temperature ranges, these being high, medium and low temperatures, the setting time of the modified samples increases the more experimental EPS90 additive it contains, also this varies according to the temperature at which it was made, in the case of low temperatures it gave us a longer setting time than the rest of the temperatures. (en_US)
application/pdf (es_PE)
spa (es_PE)
Universidad Andina del Cusco (es_PE)
info:eu-repo/semantics/openAccess (es_PE)
https://creativecommons.org/licenses/by-nc-nd/4.0/ (es_PE)
Aditivo experimental (es_PE)
Resistencia a la compresión (es_PE)
Tiempo de fraguado (es_PE)
Mortero (es_PE)
Caracterización físico-mecánica de un mortero de concreto de cemento portland tipo IP añadido con aditivo experimental EPS90, en la ciudad de Cusco (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura (es_PE)
Ingeniería Civil (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.00 (es_PE)
https://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
23950550
https://orcid.org/0000-0003-1472-6809 (es_PE)
73883842
72481432
732016 (es_PE)
Pezo Zegarra, Eliot
Roman Villegas, Eigner
Humberto Cabezas, José
Bellota Limachi, Cristel Arascelly
https://purl.org/pe-repo/renati/type#tesis (es_PE)
Privada asociativa



This item is licensed under a Creative Commons License Creative Commons