Look-up in Google Scholar
Full metadata record
Toscano Palacios, Marco Antonio
2013-08-29T16:21:03Z
2013-08-29T16:21:03Z
2010 (es_ES)
https://hdl.handle.net/20.500.14138/66
This thesis report, focuses on the automation process of Electrical Substations, with the main objective of integration into SCADA systems for electrical equipment responsible for the operation within substations, these devices have different communication protocols, after concentration information substation SCADA system, the next step to realize is sending data to the regulatory body that is in a remote location away from the substation, this is achieved using communication protocols designed for this function. All this process requires an optimization for the response times to any event that may happen in the substations and with this an optimization in operation of generation, distribution and transformation of electrical energy (en_US)
This thesis report, focuses on the automation process of Electrical Substations, with the main objective of integration into SCADA systems for electrical equipment responsible for the operation within substations, these devices have different communication protocols, after concentration information substation SCADA system, the next step to realize is sending data to the regulatory body that is in a remote location away from the substation, this is achieved using communication protocols designed for this function. All this process requires an optimization for the response times to any event that may happen in the substations and with this an optimization in operation of generation, distribution and transformation of electrical energy (es_ES)
Made available in DSpace on 2013-08-29T16:21:03Z (GMT). No. of bitstreams: 1 toscano_ma.pdf: 134626 bytes, checksum: 59412c080ac21560ca08d80ccdeda7f7 (MD5) Previous issue date: 2010 (es_ES)
Restored into DSpace on 2016-12-07T20:40:07Z (GMT). (es_ES)
Tesis (es_ES)
application/pdf
spa
Universidad Ricardo Palma - URP (es_ES)
http://cybertesis.urp.edu.pe/urp/2010/toscano_ma/html/index-frames.html (es_ES)
info:eu-repo/semantics/openAccess
https://creativecommons.org/licenses/by-nc-nd/4.0/
Repositorio Institucional - URP (es_ES)
DNP 3.0 (distributed network protocol) (en_US)
HMI (human machine interface) (en_US)
DNP 3.0 (distributed network protocol) (es_ES)
HMI (human machine interface)Automatización (es_ES)
Autonomía (es_ES)
circuito (es_ES)
confiabilidad (es_ES)
DNP 3.0 (protocolo de red distribuido) (es_ES)
enclavamiento (es_ES)
HMI (interfaz hombre máquina) (es_ES)
ICCP (es_ES)
IEC 61850 (es_ES)
IED (es_ES)
integración (es_ES)
Automatización de una Subestación Eléctrica utilizando el Protocolo IEC 61850 y el ICCP para el envio de Datos (es_ES)
info:eu-repo/semantics/bachelorThesis
Universidad Ricardo Palma. Facultad de Ingeniería. Escuela Profesional de Ingeniería Electrónica (es_ES)
Ingeniería Electrónica (es_ES)
Título Profesional (es_ES)
Ingeniero Electrónico (es_ES)
PE (es_ES)
https://purl.org/pe-repo/ocde/ford#2.02.00
https://purl.org/pe-repo/renati/nivel#tituloProfesional
712026
https://purl.org/pe-repo/renati/type#tesis
Privada asociativa
info:eu-repo/semantics/publishedVersion



This item is licensed under a Creative Commons License Creative Commons