Look-up in Google Scholar
Title: Estudio de la amplificación del terreno para el diseño sismorresistente en suelos rígidos e intermedios en las ciudades de Lima y Callao, Perú
Other Titles: Study of ground amplification for seismic-resistant design in stiff and intermediate soils in the cities of Lima and Callao, Peru.
OCDE field: http://purl.org/pe-repo/ocde/ford#2.00.00; https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 25-Jul-2022
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: La presente investigación tiene el propósito de evaluar la posible falta de representatividad en los valores de amplificación para suelos rígidos e intermedios según lo propuesto por la Norma E.030 Diseño sismorresistente. El desarrollo consta de realizar un análisis equivalente lineal en perfiles geotécnicos en la ciudad de Lima y Callao. Como punto de partida se recopilaron señales sísmicas ocurridas en la zona subducción que sucesivamente fueron corregidos en el software SeismoSignal y escaladas a un espectro de peligro uniforme a través del programa SeismoMatch. Por otro lado, se compilaron veinticinco perfiles geotécnicos con ensayos de prospección geofísicos que comprendían suelos de características intermedias y muy rígidas, a su vez, se estimaron las curvas de reducción del módulo de corte y amortiguamiento pertinente a cada perfil. Finalmente se generó el perfil unidimensional del suelo haciendo uso del programa Deepsoil v7.0 y se introdujeron los parámetros anteriormente calculados para obtener la respuesta en superficie. Los resultados mostraron que los parámetros promedios de amplificación del suelo y amplificación sísmica son superiores a los que rige la norma E.030 para suelos muy rígidos e intermedios.

The purpose of this research is to evaluate the possible lack of representativeness in the amplification values for stiff and intermediate soils as proposed by the Peruvian Seismic Resistant Design Standard E.030. The development consists of performing a linear equivalent analysis on geotechnical profiles in the cities of Lima and Callao. As a starting point, seismic signals occurring in the subduction zone were collected and successively corrected in the SeismoSignal software and scaled to a uniform hazard spectrum through the SeismoMatch software. On the other hand, twenty-five geotechnical profiles were compiled with geophysical prospecting tests comprising soils of intermediate and very stiff characteristics, and shear modulus reduction and damping curves were estimated for each profile. Finally, the one-dimensional soil profile was generated using the Deepsoil v7.0 program, and the previously calculated parameters were introduced to obtain the surface response. The results showed that the average soil amplification and seismic amplification parameters are higher than the E.030 standard for very stiff and intermediate soils.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Register date: 2-Sep-2022



This item is licensed under a Creative Commons License Creative Commons