Look-up in Google Scholar
Title: Influencia del blending de minerales con alteraciones de sílice en la percolación por lixiviación, Lucanas - Ayacucho 2017
Advisor(s): Luque Luque, Elmer Ovidio
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 1-May-2018
Institution: Universidad Privada del Norte
Abstract: RESUMEN La presente tesis tiene por objetivo principal, determinar la influencia del blending de minerales con alteraciones de sílice, en la percolación por lixiviación en pruebas de laboratorio en columnas. Además determinar a nivel laboratorio la proporción de blending y el % -200 mallas de minerales con alteraciones de sílice masiva, sílice granular mezcladas con sílice alunita; y su influencia en la percolación de la solución cianurada. Asimismo determinar la proporción de blending de minerales más óptimo que permita mejorar la percolación de solución cianurada. El estudio experimental se realizó utilizando minerales de una mina ubicada en la provincia de Lucanas, Ayacucho; donde el dominio de las alteraciones de sílice la constituyen alteraciones de sílice alunita, y esta alteración se caracteriza porque el oro se encuentra libre en una matriz de sílice fina alunita de baja percolación. A esta alteración de sílice alunita SA se le realizó el blending en proporciones con la sílice granular compacta SC y sílice masiva SM. La presencia de las tres alteraciones que presenta el mineral extraído de la mina en Lucanas, ocasionan variaciones en la percolación que no garantiza la permanencia, constancia y sostenibilidad de la ley de Au, por lo que es necesario estandarizar el blending de minerales y así obtener un manejo más eficiente y tecnológico de la mezcla de minerales en el pad. El resultado del estudio concluyó que existe una influencia significativa del blending de minerales con alteraciones de sílice en la percolación por lixiviación. Asimismo se concluye que el % granulometría – 200 mallas del blending de minerales de las alteraciones, es inversamente proporcional a la percolación; es decir a menor % granulometría - 200 mallas del blending de minerales mayor será el ratio de percolación de la solución cianurada, realizando todas las proporciones de blending con la sílice alunita. También se concluye que la proporción de blending más óptima con la sílice alunita SA, consiste en los test 6 y 9, que tienen aceptable percolación. Es decir si a la sílice alunita SA, se le mezcla con sílice granular compacta SGC, en 25% SA + 75% SGC, la percolación se incrementa a 1.87 m/día debido a que la cantidad de finos que aporta la mezcla es de 7.22% -200 mallas. Si a la sílice alunita SA, se le mezcla con sílice masiva SM, en 25% SA + 75% SM, la percolación se incrementa a 1.90 m/día debido a que la cantidad de finos que aporta la mezcla es de 4.32% -200 mallas. PALABRAS CLAVES: Alteración, alunita, argílico, blending, epitermal, percolación, sílice.

ABSTRACT The main objective of this thesis is to determine the influence of the blending of minerals with silica alterations in percolation by leaching in laboratory tests in columns. In addition, determine at laboratory level the proportion of blending and% -200 mesh of minerals with alterations of massive silica, granular silica mixed with silica alunite; and its influence on the percolation of the cyanide solution. Also determine the proportion of blending of minerals more optimal to improve the percolation of cyanide solution. The experimental study was conducted using minerals from a mine located in the province of Lucanas, Ayacucho; where the domain of the silica alterations are alunite silica alterations, and this alteration is characterized because the gold is free in a matrix of thin silica alunite of low percolation. To this alteration of silica alunite SA the blending was performed in proportions with the compact granular silica SC and massive silica SM. The presence of the three alterations presented by the ore extracted from the mine in Lucanas, cause variations in the percolation that does not guarantee the permanence, constancy and sustainability of the Au law, for which it is necessary to standardize the blending of minerals and thus obtain more efficient and technological management of the mixture of minerals in the pad. The result of the study concluded that there is a significant influence of the blending of minerals with silica alterations in percolation by leaching. Likewise, it is concluded that the% granulometry - 200 mesh of the mineral blending of the alterations, is inversely proportional to the percolation; that is, at a lower% granulometry - 200 mesh of mineral blending, the higher the percolation ratio of the cyanide solution, making all blending proportions with silica alunite. It is also concluded that the most optimal blending ratio with silica alunite SA, consists of tests 6 and 9, which have acceptable percolation. That is to say if the silica alunite SA, is mixed with granular silica compact SGC, in 25% SA + 75% SGC, the percolation is increased to 1.87 m / day because the amount of fines provided by the mixture is 7.22 % 200 mesh If the silica alunite SA, is mixed with massive silica SM, in 25% SA + 75% SM, the percolation is increased to 1.90 m / day because the amount of fines provided by the mixture is 4.32% -200 tights. KEY WORDS: Alteration, alunite, argillic, blending, epithermal, percolation, silica.
Note: Cajamarca
Discipline: Ingeniería de Minas
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero de Minas
Register date: 31-May-2018; 31-May-2018



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.