Buscar en Google Scholar
Título: Diseño de un sistema de gestión en seguridad y salud ocupacional basado en la norma ISO 45001: 2018 para reducir el nivel de riesgos en la empresa Resurreción EIRL, 2020
Asesor(es): Arana Arana, Katherine del Pilar
Campo OCDE: https://purl.org/pe-repo/ocde/ford#2.07.00
Fecha de publicación: 11-jul-2022
Institución: Universidad Privada del Norte
Resumen: La presente investigación se hizo en la empresa Resurrección E.I.R.L., la cual se dedica a la Producción, comercialización y transporte de Óxido de Calcio. Su objetivo general es realizar un Diseño de Gestión en Seguridad y Salud Ocupacional, basado en la norma ISO 45001:2018, para disminuir el nivel de riesgos en dicha empresa. El inicio de este estudio se dio con la verificación del cumplimiento de la norma utilizando un Checklist para el análisis de la situación actual, este nos indica que la empresa carece un gran porcentaje del cumplimiento de dicha norma, teniendo sólo un 32 %, lo cual es una gran deficiencia para la empresa, realizando así el diseño basándonos en la mejora continua y utilizando el ciclo Deming o PVHA como metodología para ordenar la documentación y evaluar la mejora continua. El resultado de este diseño nos da una mejora de un 98.44% de cumplimiento. Seguido evaluamos los niveles de riesgos a través de los IPERC de las 4 áreas de trabajo, dentro de ellas las actividades que se realiza en la área de Cantera vienen a ser la más importante, ya que es donde las actividades son más peligrosas y que con este estudio realizado da un mejor resultado según su nivel de riesgos, teniendo los siguientes datos: niveles de riesgos altos de 24%, medios de 11%, bajos de 65% con su respectivo análisis, se da una mejora con un nivel de riesgos altos de 5%, medio 22% y bajo con 73%. El nivel de riesgos es aceptable ya que por cada área disminuye un gran porcentaje los niveles altos y aumentan los bajos. La implementación de la Norma ISO 45001:2018, tiene un costo de s/. 42 103. 50. El resultado de análisis beneficio- costo, nos dio como resultado 1.37, ya que por cada sol que se invierte se obtiene un beneficio de 0.37, dando una viabilidad de mayor beneficio para la empresa Resurrección EIRL.

This research was carried out at the company Resurrección E.I.R.L., which is dedicated to the production of lime. Its general objective is to carry out an Occupational Health and Safety Management Design, based on the ISO 45001: 2018 standard, to reduce the level of risks in said company. The beginning of this study occurred with the verification of compliance with the standard using a Checklist for the analysis of the current situation, this indicates that the company lacks a large percentage of compliance with said standard, having only 32%, which is a great deficiency for the company, thus making the design based on continuous improvement and using the Deming cycle or PVHA as a methodology to order the documentation and evaluate continuous improvement. The result of this design gives us an improvement of 98.44% compliance. We then evaluate the risk levels through the IPERCs of the 4 work areas, within them the activities carried out in the Quarry area are the most important, since it is where the activities are most dangerous and with This study carried out gives a better result according to its risk level, having the following data: high risk levels of 24%, average of 11%, low of 65% with their respective analysis, there is an improvement with a high risk level 5%, medium 22% and low with 73%. The level of risk is acceptable since for each area the high levels decrease by a large percentage and the low levels increase. The implementation of the ISO 45001: 2018 Standard has a cost of s /. 42 103. 50. The result of the benefit-cost analysis gave us the result of 1.37, since for each sun that is invested, a profit of 0.37 is obtained, giving a higher profit viability for the company Resurrección EIRL.
Enlace al repositorio: https://hdl.handle.net/11537/32164
Disciplina académico-profesional: Ingeniería Industrial
Institución que otorga el grado o título: Universidad Privada del Norte. Facultad de Ingeniería
Grado o título: Ingeniero Industrial
Jurado: Quispe Vásquez, Luis Roberto; Silva Abanto, Roger Samuel; Mendoza Azañero, Ana Rosa
Fecha de registro: 13-ene-2023



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons