Look-up in Google Scholar
Title: Diseño de vivienda de adobe con revestimiento de esteras de totora para mejorar el confort térmico en el distrito de Ayacucho de la provincia de Huamanga del departamento de Ayacucho
Advisor(s): Eyzaguirre Acosta, Carlos Augusto
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01; https://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 15-Nov-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: In Peru, the phenomenon of frosts manifests itself between the months of May and September. This climatic condition primarily affects the inhabitants of the Peruvian highlands such as in the department of Ayacucho. Generally, it is the very same individuals who suffer from diseases such as the cold. This is due to the lack of housing that minimizes the loss of internal energy, as often, these are constructed without providing adequate comfort inside. Addressing this issue, the present thesis proposed the application of totora (cattail) reed mats as interior lining for houses to enhance thermal comfort. Therefore, the manufacturing of adobe bricks was developed according to the stipulations of standard E.080. Subsequently, two prototype houses were constructed with the produced adobe, and one of them was internally lined with totora reed mats. Once all this was done, the temperatures for both houses were taken using specialized equipment. Then, the thermal conductivity of the houses was calculated and their results were compared. Finally, the results revealed a 55.40% reduction in thermal conductivity for the house with the totora reed mat lining, compared to the house without any lining, and thermal resistance in the lined house increased by 71.70%.

En el Perú, las heladas se presentan entre los meses de mayo y setiembre. Este clima afecta principalmente a los habitantes de la sierra peruana como en el departamento de Ayacucho. En general, son los mismos quienes padecen enfermedades como la gripe. Esto se debe a la falta de viviendas que minimicen la pérdida de energía interna, ya que muchas veces, estas son construidas sin presentar un adecuado confort interno. Por ello, esta tesis se propone el revestimiento interior de las viviendas con esteras de totora para mejorar el confort térmico. En este sentido, se desarrollará con la fabricación de los adobes según la norma E.080. Posteriormente, se construirán dos viviendas prototipos con el adobe elaborado y una de ellas se revestirá internamente con esteras de totora. Después de esta etapa, se realizará un registro de las temperaturas para ambas viviendas por medio de un equipo. Seguidamente, se hará el cálculo de la conductividad térmica para las viviendas y se comparará sus resultados. Finalmente, como resultado, la conductividad térmica se redujo en un 55.40% en la vivienda revestida con esteras de totora en comparación a la vivienda sin revestimiento y la resistencia térmica incrementó en un 71.70% al ser revestida.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Rodriguez Barboza, Jose Ulises; Peña Torres, Pablo Jhoel
Register date: 12-Jan-2024; 12-Jan-2024



This item is licensed under a Creative Commons License Creative Commons