Look-up in Google Scholar
Title: La luz como onda electromagnética 1.- Velocidad de la luz, reseña histórica. 2.- Reflexión y refracción. Principio de Huygens y del tiempo mínimo. 3.- Índice de refracción de diferentes medios. Reflexión total interna. 4.- Reflexión en superficies planas y esféricas. Formación de imágenes. 5.- Superficies reflectoras esféricas. 6.- Superficies refractantes esféricas. 7.- Lentes delgadas. Imágenes reales y virtuales. Objetos reales y virtuales. Imagen derecha e invertida. Aumento lateral. 8.- Aparatos ópticos: lupa, proyector, telescopio, microscopio.
OCDE field: http://purl.org/pe-repo/ocde/ford#1.03.03
Issue Date: 13-Sep-2018
Institution: Universidad Nacional de Educación Enrique Guzmán y Valle
Abstract: La presente investigación desarrolla que hasta el siglo XVI se pensaba que la luz era infinita. Galileo para medir la velocidad de la luz y con la ayuda de un asistente, ambos con una linterna y separado aproximadamente una milla cubrían y destapaban la interna, Galileo trataba de medir el tiempo, sus resultados fracasaron dijo “la medición era tan grande que no podía ser medida”. En 1676, Ole Roemer observó que uno de los satélites de Júpiter llamado Io no tenía un periodo de rotación constante. Tras reunir información por más de un año encontró que Io tenía un periodo más largo que el promedio cuando la Tierra se alejaba de Júpiter. Tenía una diferencia de 22 minutos que cuando la Tierra se encontraba cerca a Júpiter de cuando se aejaba (6 meses). Él supuso que la luz se demoraba en llegar, ya que había demasiada distancia, por eso llegaba con un retraso de 22 min. Aproximadamente 1320 segundos y en un cálculo llegó a conseguir que la velocidad de la luz era 214 000 km/s demostrando que la velocidad de la luz es finita. En 1849, Hypoite Fizeau utilizó un ingenioso experimento para hacer que la luz de una fuerte fuente de luz incidiera en un espejo semiplano, que se desvía al pasarlo por los dientes de un engranaje. La velocidad de rotación del engranaje se puede cambiar a voluntad. . A través de este experimento se obtiene un valor de velocidad muy cercano al número real y también se puede medir la velocidad de la luz en el agua. Después existieron pruebas más acertadas con diferentes experimentadores y métodos hasta llegar a utilizar el método de láser donde nos da un valor exacto de la velocidad de la luz. El fenómeno de la reflexión se introduce en los conceptos de ángulo de incidencia y ángulo de reflexión El ángulo de incidencia y el ángulo de reflexión permanecen separados por una línea imaginaria llamada común que es perpendicular a el área de división de 104 ambos medios. La luz incidente, la luz reflejada y la usual permanecen en el mismo plano, y el ángulo de incidencia y el ángulo de reflexión son equivalentes. El inicio de Fermat del tiempo más corto apunta que el camino real que toma un haz de luz entre 2 aspectos es la era de viaje más corto. Una vez que hablamos de índice de refracción, principalmente es igual a la velocidad de la luz en el vacío. Reflexión interna total, donde n1 y n2 son los índices de refracción del medio 1 y medio 2, respectivamente. Mientras se incrementa el ángulo de incidencia, es igual a 90 grados y los rayos refractados son paralelos a la interfaz entre los medios. Desde aquel costo, la reflexión lo es todo. Por consiguiente, en la reflexión de una área plana, el punto de la imagen es una manera adecuado de explicar la dirección de diversos rayos reflejados. Si la superficie del gráfico no es lisa, se difundirá cuando se refleje y la luz de diferentes partes de la superficie seguirá direcciones irrelevantes. En este caso, no habría imagen definida, no podríamos ver nuestra imagen. En las superficies esferitas la reflexión puede ser cóncava o convexa se cumpe que e ánguo de incidencia y e de refexión son iguales. La norma a la superficie es un radio. Podemos decir que en los espejos cuando el objeto y la imagen están al mismo lado, entonces la imagen es rea y si están en lados contrarios la imagen es virtual. En cambio en los entes, si el objeto y la imagen están al mismo lado, entonces esto es virtual, en cambio sí están en lados contrarios es real. Las herramientas ópticos son una aplicación de espejos y lentes para obtener imágenes de objetos mayores, más pequeños, más cercanos o más lejanos. Upa es una entidad convergente con una distancia de sellado más pequeña, utilizada para aumentar el tamaño del objeto de visualización. 105 Observe el microscopio con el ocular, la imagen ampliada del objeto dada por la lente del objetivo (lente convergente), la lente del objetivo es bastante convergente y el objeto se sitúa fuera del foco empero cerca del foco. Un telescopio llamado telescopio astronómico es un telescopio porque puede ampliar imágenes de cuerpos celestes. Estos se denominan telescopios refractores. Usa un sistema de lentes convergentes, en el cual la luz se refracta, y esta refracción en la lente del objetivo provoca que los rayos de luz paralelos de un objeto bastante lejano converjan en un punto determinado del plano focal, o posibilita ver la distancia El objeto es viejo y brillante.

The present investigation develops that until the 16th century it was thought that light was infinite. Galileo to measure the speed of light and with the help of an assistant, both with a flashlight and about a mile apart, covered and uncovered the internal one, Galileo tried to measure time, his results failed, he said "the measurement was so great that it did not it could be measured ”. In 1676, Ole Roemer observed that one of Jupiter's satellites called Io did not have a constant rotation period. After gathering information for more than a year, he found that Io had a longer period than average when the Earth was moving away from Jupiter. It had a difference of 22 minutes than when the Earth was close to Jupiter from when it was away (6 months). He assumed that the light was slow to arrive, since there was too much distance, so it arrived with a delay of 22 min. Approximately 1320 seconds and in a calculation it got to obtain that the speed of the light was 214 000 km / s demonstrating that the speed of the light is finite. In 1849, Hypoite Fizeau used an ingenious experiment to make light from a strong light source strike a semi-plane mirror, which is deflected by passing it through the teeth of a gear. The speed of rotation of the gear can be changed at will. . Through this experiment, a speed value very close to the real number is obtained and the speed of light in water can also be measured. Later there were more successful tests with different experimenters and methods until the laser method was used where it gives us an exact value of the speed of light. The phenomenon of reflection is introduced into the concepts of angle of incidence and angle of reflection. The angle of incidence and the angle of reflection remain separated by an imaginary line called common that is perpendicular to the area of ​​division of 104 both media. Incident light, reflected light, and usual light remain in the same plane, and the angle of incidence and the angle of reflection are equivalent. Fermat's onset of the shortest time points out that the royal path that a beam of light takes between 2 aspects is the shorter travel era. Once we talk about refractive index, it is mainly equal to the speed of light in vacuum. Total internal reflection, where n1 and n2 are the refractive indices of medium 1 and medium 2, respectively. As the angle of incidence increases, it is equal to 90 degrees and the refracted rays are parallel to the interface between the media. From that cost, reflection is everything. Therefore, in the reflection of a plane area, the image point is a suitable way of explaining the direction of various reflected rays. If the surface of the graphic is not smooth, it will diffuse when reflected and the light from different parts of the surface will follow irrelevant directions. In this case, there would be no defined image, we could not see our image. In spherical surfaces, the reflection can be concave or convex if the angle of incidence and the angle of reflection are equal. The norm to the surface is a radius. We can say that in mirrors when the object and the image are on the same side, then the image is real and if they are on opposite sides the image is virtual. On the other hand, in entities, if the object and the image are on the same side, then this is virtual, while if they are on opposite sides, it is real. Optical Tools are a mirror and lens application for imaging larger, smaller, closer, or more distant objects. Upa is a converging entity with a smaller seal distance, used to increase the size of the display object. 105 Observe the microscope with the eyepiece, the magnified image of the object given by the objective lens (converging lens), the objective lens is quite convergent and the object is out of focus but close to focus. A telescope called an astronomical telescope is a telescope because it can magnify images of celestial bodies. These are called refracting telescopes. It uses a converging lens system, in which light is refracted, and this refraction in the objective lens causes parallel light rays from a fairly distant object to converge at a certain point on the focal plane, or makes it possible to see the distance. object is old and shiny.
Discipline: Física - Matemática
Grade or title grantor: Universidad Nacional de Educación Enrique Guzmán y Valle. Facultad de Ciencias
Grade or title: Título Profesional de Licenciado en Educación
Juror: Hernández Alcántara, Walter Alberto; Cuadros Cárdenas, Pablo Emilio; Marzano Sosa, Roberto Fabián
Register date: 26-Aug-2021; 26-Aug-2021



This item is licensed under a Creative Commons License Creative Commons