Look-up in Google Scholar
Title: Expansión urbana y zonificación de la capacidad portante del suelo en el ámbito periurbano de la ciudad capital del distrito de Catilluc, provincia San Miguel, región Cajamarca 2019
Advisor(s): Urteaga Toro, Manuel Rafael
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 17-Apr-2021
Institution: Universidad Privada del Norte
Abstract: The objective of this research was to determine the areas suitable for urban expansion based on the bearing capacity presented by the periurban soils of the capital city of the Catilluc district, making 20 pits of 2.0 m depth, to extract samples from each soil stratum. and determine its physical and mechanical characteristics (type of soil, friction angle, cohesion and bearing capacity). Through the direct shear test, the bearing capacity of the soils could be calculated using the Karl Terzaghi formula, the values of which were obtained and divided by a safety factor of 3 to obtain their admissible load capacity, with which a zoning, considering three zones. Zone I, suitable for development, for soils with an admissible load capacity greater than 1 kg / cm2, represented by SM type soils (silty sand). Zone II, moderately suitable for urbanization, for soils with an admissible load capacity between 0.8 kg / cm2 and 1 kg / cm2, represented by soils type CL (inorganic clay). Zone III, undeveloped, for soils with an allowable load capacity less than 0.8 kg / cm2, represented by OH soils (organic clay), CH (inorganic clay with high plasticity) and MH (inorganic silt with high plasticity).

La presente investigación tuvo como objetivo determinar las zonas aptas para expansión urbana en base a la capacidad portante que presentan los suelos periurbanos de la ciudad capital del distrito de Catilluc, realizando 20 calicatas de 2.0 m de profundidad, para extraer muestras de cada estrato de suelo y determinar sus características físicas y mecánicas (tipo de suelo, ángulo de fricción, cohesión y capacidad portante). Mediante el ensayo de corte directo se pudo calcular la capacidad portante de los suelos empleando la fórmula de Karl Terzaghi, a cuyos valores obtenidos se los dividió entre un factor de seguridad de 3 para obtener su capacidad de carga admisible, con la cual se realizó una zonificación, considerando tres zonas. Zona I, apta para urbanizar, para suelos con capacidad de carga admisible mayor a 1 kg/cm2, representada por suelos tipo SM (areno limoso). Zona II, medianamente apta para urbanizar, para suelos con capacidad de carga admisible entre 0.8 kg/cm2 y 1 kg/cm2, representada por suelos tipo CL (arcilla inorgánica). Zona III, no urbanizable, para suelos con capacidad de carga admisible menor a 0.8 kg/cm2, representada por suelos OH (arcilla orgánica), CH (arcilla inorgánica de alta plasticidad) y MH (limo inorgánico de alta plasticidad).
Note: Cajamarca
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Vásquez Ramírez, Luis; Merma Gallardo, Lizbeth Milagros; Guillen Sheen, Tulio Edgar
Register date: 8-Sep-2021; 8-Sep-2021



This item is licensed under a Creative Commons License Creative Commons